DC Inverter Water Source Heat Pump

Name: Ground source DC inverter heat pump

Model:FW-03D

Power supply:220V/1N/50Hz

Heating capacity10~16kW

Max. water temp:60℃

Connection pipe:1"inch

Refrigerant:R32

Working mode:Heating+DHW

Compressor:Mitsubishi

Condenser:Plate heat exchanger

Evaporator:Plate heat exchanger

Expansion valve:Electronic expansion valve

High pressure switch:4.2-3.6MPa

Low pressure switch :0.05-0.15MPa

Circulation pump:include

Water flow switch:include

Rated heating working condition: heat source side heat exchnage inlet water temp 15℃, hot water side heat exchnage beginnig of temp 15℃,end of temp 60℃

Inverter Geothermal heat pump for heating
A geothermal heat pump or ground source heat pump (GSHP) is a central heating and/or cooling system that transfers heat to or from the ground.It uses the earth as a heat source (in the winter) or a heat sink (in the summer). This design takes advantage of the moderate temperatures in the ground to boost efficiency and reduce the operational costs of heating and cooling systems, and may be combined with solar heating to form a geosolar system with even greater efficiency.

Main features
1. High performance hermetic scroll compressor, Panasionic comprssor;
2. Shell and tube type condenser and evaporator, high heat exchange efficiency;
3. Modular design, compact size, factory assembled, save installation space;
4. Intelliigent controller, failure checking, balance operation, timer on/off,etc
5. Famous brand thermal expansion valve , ensure better performance.
6. Complete safety devices: high/low pressure switch, overcurrent protection, overload protection,overheat protection,
reverse&lack phase protection, short flow protection,etc;
7. Refrigerant : R410A or R32
8. Capacity range:5kW~124kW